
General Details
Operating temperature | -30 °C… +70 °C |
Bending radius min. | 10xD |
Impedance | 75 ± 3 ΩΩ |
Capacity | 54 ± 2 pF/m |
Propagation speed | %82±2 |
Insulation resistance min. | 2 G Ω x km |
Operating voltage max. | 1000V |
Test voltage | 2500 V |
conductor resistance max. | 0,22 mm2 96 Ω/km 0,50 mm2 39 Ω/km 0,75 mm2 26 Ω/km 1,00 mm2 19,5 Ω/km |
Attenuation @20 °C | 50 MHz 5,95dB/100m 200 MHz 11,71 dB/100m 470 MHz 18,08 dB/100m 860 MHz 24,79 dB/100m 1000 MHz 26,85 dB/100m |
return loss | 5-470 MHz >20dB 470-1000M Hz >18dB |
Standards | TSE K 212 |
fire performance | Vertical flame spread EN 60332-1-2Corrosive gas EN 60754-1/2Smoke density EN 61034-2 |
EU declaration of conformity | LVD Low Voltage Regulation 2014/35/ABRoHS Some Hazardous Substances Restriction of Use 2011/65/EU |
Usage areas
Using physical foamed insulation technology, cables with characteristic impedance of 75 ohm are used in indoor and dry environments, CCTV CCTV camera applications. It provides simultaneous transmission of video, power, audio and control signals. Halogen-free material is used in the cable structure (it does not receive and transmit the flame late, it does not create toxic gas and black smoke that hinders vision after combustion). It is used in buildings such as mass housing, hotels, shopping centers, smart buildings, where people are concentrated, especially in places that should not be affected by fire conditions.
Cable Structure
Conductive | Electrolytic copper wire, 0 0.81 mm (AWG20) |
Insulation | Physically foamed PE, Ø 3.70mm, 70°C, EN 50290-2-23 |
Display | Cu-Pet foil min.100% coverage, Electrolytic copper wire braid |
Inner sheath | HFFR, 70°C EN 50290-2-27 |
Conductive | Stranded copper wire, 0.75mm2, Class5, IEC 60228 |
Insulation | HFFR, Black-Red, 70°C EN 50290-2-26 |
Conductive | Stranded copper wire, 0.50mm2, Class5, IEC 60228 |
Insulation | HFFR, Yellow-Blue, 70°C EN 50290-2-26 |
Sheath | HFFR – RAL 7001 Grey, 70°C EN 50290-2-27 |
Proposal form
Comments